Honda Accord: Transaxle
Priweline/Ajcle
- Special Tools
- Component Location Index
- Driveshaft Inspection
- Driveshaft Removal
- Driveshaft Disassembly
- Dynamic Damper Replacement
- Driveshaft Reassembly
- Driveshaft Installation
- Intermediate Shaft Removal
- Intermediate Shaft Disassembly
- Intermediate Shaft Reassembly
- Intermediate Shaft Installation
Carrier Bearing Preload Inspection
Special Tools Required
•Driver Handle, 15 x 135L 07749-0010000
•Attachment, 72 x 75 mm 07746-0010600
-Preload Inspection Tool 07HAJ-PK40201
NOTE;
-If the transmission housing, the torqu ...
Special Tools
...
See also:
Bearing Removal
Special Tools Required
•Attachment, 78x80 mm 07NAD-PX40100
-Driver Handle, 15 x 135L 07749-0010000
-Bearing Driver Attachment, 42 x 47 07746-0010300
1. Remove the idler gear shaft (see page 1 ...
Recirculation Control Motor Test
NOTE: Before testing the motor, check for HVAC DTCs
(see page 21-101).
1. Disconnect the 7P connector from the recirculation
control motor.
Incorrectly applying power and ground to the
recirc ...
Bearing Installation
Special Tools Required
-Attachment, 78 x 80 mm 07NAD-PX40100
-Driver Handle, 15 x 135L 07749-0010000
-Bearing Driver Attachment, 42 x 47 07746-0010300
1. Install the bearings in the direction show ...