Rear Power Window Switch Test/Replacement

1. Carefully remove the rear power window switch (A). 2. Disconnect the 14P connector (B) from the rear power window switch. 3. Remove the three screws and the rear power window switch (A). ...

Component Location Index

  ...

See also:

Selecting a Memorized Position
To select a memorized position, do this: 1. Make sure the parking brake is set and the shift lever is in Park (automatic). 2. Press the desired memory button (1 or 2) until you hear a beep ...

Sleep and Wake-up Mode Test
1. Shift to the sleep mode: Close all doors. Turn the ignition switch to LOCK (0), and remove the key, then open and close the driver's door. If the MICU receives no further inputs listed below, i ...

General Troubleshooting Information
Mow to Check for DTCs with the HDS NOTE: Check the vehicle battery condition first {see page 22-90). 1. Make sure the ignition switch is turned to LOCK (0). 2. Connect the HDS to the data link ...