Wipers/Washers

Circuit Diagram

See also:

Shift Lock Solenoid Test
1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not, go to the ...

DTC Troubleshooting
DTC B10A2: Driver's MICU (EEPROM) Error NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see page 22-134). 1. Clear the D ...

Yaw Rate-Lateral Acceleration Sensor Replacement
NOTE: - Do not damage or drop the sensor as It Is sensitive. - Do not use power tools when replacing the sensor. 1. Turn the ignition switch to LOCK (0). 2. Remove the center console (see ...