Honda Accord: Climate Control
- Component Location Index
- General Troubleshooting Information
- DTC Troubleshooting Index
- Symptom Troubleshooting Index
- System Description
- Circuit Diagram
- DTC Troubleshooting
- Climate Control Power and Ground Circuit Troubleshooting
- Navigation Communication Line Circuit Troubleshooting
- Audio Communication Line Circuit Troubleshooting
- Climate Control Switch Communication Line Circuit Troubleshooting
- A/C Pressure Switch Circuit Troubleshooting
- A/C Signal Circuit Troubleshooting
- In-car Temperature Sensor Test
- In-car Temperature Sensor Replacement
- Outside Air Temperature Sensor Test
- Outside Air Temperature Sensor Replacement
- Sunlight Sensor Test
- Sunlight Sensor Replacement
- Passenger's Air Mix Control Motor Test
- Passenger's Air Mix Control Motor Replacement
- Mode Control Motor Test
- Recirculation Control Motor Test
- Climate Control Unit Removal / Installation
- Climate Control Switch Removal / Installation
A/C System Test
Performance Test
• Air conditioning refrigerant or lubricant vapor can
irritate your eyes, nose, or throat.
•Be careful when connecting service
equipment.
• Do not breathe ref ...
Component Location Index
'10 model
With navigation
Without navigation
...
See also:
Cf Hinder Bore Honing
Only a scored or scratched cylinder bore must be honed.
1. Measure the cylinder bores (see page 7-17).
If the engine block is to be reused, hone the cylinders,
and remeasure the bores.
2. Re ...
Wear Indicators
The groove where the wear indicator is
located is 1/16 inch (1.6 mm) shallower than
elsewhere on the tire. If the tread has worn so
that the indicator is exposed, replace the tire.
Worn out ...
Change Lever Clearance Inspection
1. Measure the clearance between the change lever (A)
and the select lever (B) with a feeler gauge (C). If the
clearance exceeds the service limit, go to step 2.
Standard: 0.05-”0.25 mm (0.002 ...