Honda Accord: Standards and Service Limits
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Specifications / Standards and Service Limits
- Engine Electrical
- Engine Assembly
- Cylinder Head
- Engine Block
- Engine Lubrication
- Cooling System
- Fuel and Emissions
- Clutch
- Clutch (cont'd)
- Manual Transmission and M/T Differential
- Manual Transmission and M/T Differential (cont'd)
- Automatic Transmission and A/T Differential
- Automatic Transmission and A/T Differential: (cont'd)
- Automatic Transmission and A/T Differential (cont'd)
- Automatic Transmission and A/T Differential (cont'd)
- Steering
- Suspension
- Brakes
- Air Conditioning
Specifications
...See also:
Bearing Removal
Special Tools Required
•Attachment, 78x80 mm 07NAD-PX40100
-Driver Handle, 15 x 135L 07749-0010000
-Bearing Driver Attachment, 42 x 47 07746-0010300
1. Remove the idler gear shaft (see page 1 ...
Wheel Speed Sensor Replacement
Front
1. Turn the ignition switch to LOCK (0).
2. Release the clamp (A), then disconnect the wheel speed sensor connector (B).
3. Remove the bolts and the wheel speed sensor (C).
4. Install ...
Alternator FR Signal Circuit
Troubleshooting
1. Start the engine, and let it idle.
2. Monitor the ALTERNATOR in the DATA LIST with the
HDS.
3. Check if the indicated percentage varies when the
headlight switch is turned on.
Does the p ...