Honda Accord: Quick Reference Guide - Honda Accord 2013-2025 Owner's ManualHonda Accord: Quick Reference Guide

Honda Accord 2013-2025 Owner's Manual
...

Visual Index
...

See also:

Change Lever Clearance Inspection
1. Measure the clearance between the change lever (A) and the select lever (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2. Standard: 0.05-”0.25 mm (0.002 ...

Symptom Troubleshooting
Rapid brake pad wear, vehicle vibration (after a long drive), or high, hard brake pedal NOTE: Make sure that the caliper pins are installed correctly. Upper caliper pin B and lower caliper pin A ar ...

Backlash Inspection
1. Place the differential assembly on V-blocks (A), and install the intermediate shaft (B) and the left driveshaft (C). 2. Measure the backlash of both pinion gears (D) with a dial indicator (E) ...