Honda Accord: M/T Differential
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Transaxle / M/T Differential
- Component Location Index
- Backlash Inspection
- Differential Carrier/Final Driven Gear Replacemen
- Carrier Bearing Replacement
- Oil Seal Replacement
- Differential Thrust Clearance Adjustment
Shift Lever Housing Replacement
NOTE:
- Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
- Take care not to scratch the center console,
dashboard, and related parts.
1. Remove th ...
See also:
Secondary H02S Replacement
Special Tools Required
02 Sensor Wrench Snap-on S6176 or equivalent,
commercially available
1. Disconnect the secondary H02S 4P connector (A),
then remove the secondary H02S (B).
2. Install the ...
Clutch Interlock Switch T e s t
M/T model
1. Disconnect the clutch interlock switch connector (A).
2. Remove the clutch interlock switch (B).
3. Check for continuity between the terminals according
to the table.
- If the ...
Washer Reservoir Replacement
1. Remove the right inner fender (see page 20-290).
2. Disconnect the 2P connector(s) (A) from the washer
motor (B) and the washer fluid level switch (Canada
models).
Washer Reservoir Capacity:
...