Engine Mechanical

Special Tools

See also:

Adjusting the Power Mirrors
1. Turn the ignition switch to the ON (II) position. 2. Move the selector switch to L (driver’s side) or R (passenger’s side). 3. Push the appropriate edge of the adjustment switch to ...

Wear Indicators
The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out ...

Crankshaft Main Bearing Replacement
Main Bearing Clearance Inspection 1. To check the main bearing-to-journal oil clearance, remove the lower block and the bearing halves (see page 7-14). 2. Clean each main journal and the bearing ...