Engine Assembly

...

Engine Removal

Special Tools Required . Universal Lifting Eyelet 07AAK-SNAA120 Engine Hanger Adapter VSB02C000015* - Engine Support Hanger, A and Reds AAR-T1256* - Subframe Adapter VSB02C000016* *Available thro ...

See also:

Danger/Warning/Caution Label Locations
4-door Model ...

Brake Pedal Position Switch Signal Circuit Troubleshooting
1. Turn the ignition switch to ON (II). 2. Check the BRAKE SWITCH in the DATA LIST with the HDS. Does it indicate OFF? YES-Go to step 3. NO-lnspect the brake pedal position switch (see page ...

Tensioner Pulley Replacement
1. Remove the auto-tensioner (see page 4-31). 2. Clamp the auto-tensioner (A) by using two 8 mm bolts (B) and a vise (C) as shown. Do not clamp the auto-tensioner itself, then remove the tensione ...