Honda Accord: Exhaust Pipe and Muffler Replacement - Intake Manifold and Exhaust System - Engine Mechanical - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Exhaust Pipe and Muffler Replacement

NOTE: Use new gaskets and self-locking nuts when reassembling.

Engine Cooling


    Intake Manifold Removal and Installation
    Exploded View Removal 1. Do the battery removal procedure (see page 22-92). 2. Remove the front grille cover: Р’В© 2-door (see page 20-274) Р’В© 4-door (see page 20-274) 3. Remove ...

    Engine Cooling
    ...

    See also:

    Clutch Fluid
    Manual transmission only The fluid level should be between theMINandMAXmarks on the side of the reservoir. If it is not, add brake fluid to bring it up to that level. Use the same fluid spec ...

    Fasten and Position the Seat Belts
    Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries ...

    Automatic Transmission/CVT\
    • Creeping The engine runs at a higher idle speed and creeping increases. Keep the brake pedal firmly depressed when stopped. • Kickdown Quickly depressing the accelerator pedal while drivin ...