Trunk Lid Latch Switch Test

1. Open the trunk lid. 2. Disconnect the 3P connector (A) from the trunk lid latch assembly (B). 3. Check for continuity between terminals No. 1 and No. 2. • There should be continui ...

Component Location Index

4-door with moonroof 2-door with moonroof ...

See also:

Seat
Driver's seat - 4-door 2-door Front passenger's seat 4-cfoor 2-door ...

Dynamic Damper Replacement
1. Remove the Inboard joint (see page 16-7). 2. Remove the dynamic damper band (see step 1 on page 16-7). 3. Remove the dynamic damper (A). Left driveshaft Right driveshaft 4. Install a ...

Symptom Troubleshooting
VSA activation indicator does not go off, and no DTCs are stored NOTE: If the VSA modulator was replaced prior to the activation indicator turning on, do the VSA sensor neutral position memorizati ...