Mirrors

...

Power Mirror Replacement

NOTE: Take care not to scratch the door. 1. Lower the door glass fully. 2. With your hand, carefully pull out the top edge of the tweeter cover (A) to release the upper hooks (B) and detach th ...

See also:

Brake Fluid
The fluid level should be between theMINandMAXmarks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspect ...

System Check
1. Connect the HDS to the data link connector. 2. Turn the ignition switch to ON (II). 3. Monitor the SYSTEM CHECK in the IMMOBILIZER INFO with the HDS. 4. If the HDS displays NORMAL N-1,the ...

Mode Control Motor Test
'08-09 models with A/T and '10 model with A/T NOTE; Before testing the motor, check for HVAC DTCs (see page 21-9). 1. Disconnect the 7P connector from the mode control motor. Incorrectly app ...