Honda Accord: Chassis and Paint Codes - f10 2-door Model
Paint Code
...
Vehicle Identification Number
Manufacturer, Make, and Type of Vehicle
1HG: Honda of America Mfg., Inc.
Honda passenger vehicle
Line, Body, and Engine Type
CS1: Accord Coupe/K24Z3
Body Type and Transmission Type
A: 2-door ...
See also:
Driveshaft Installation
NOTE: Before starting Installation, make sure the mating
surfaces of the joint and the splined section are clean.
1 Apply about 5 g (0.18 oz) of moly 60 paste
(P/N 08734-0001) to the contact area ...
A/C Compressor Relief Valve
Replacement
1. Recover the refrigerant with a
recovery/recycling/charging station (see page 21-80).
2. Raise the vehicle on a lift.
3. Remove the relief valve (A) and the O-ring (B). Plug
the opening to k ...
Power Window Master Switch
Replacement
4-door
1. Carefully remove the power window master switch
(A).
2. Disconnect the 37P connector (B) from the power
window master switch, and the 13P connector (C)
from the power mirror switch (D ...