Honda Accord: Steering Wheel Rotational Play Check
1. Set the front wheels in the straight ahead position.
2. Measure how far you can turn the steering wheel left and right without moving the front wheels.
-If the play is within the limit, the steering gearbox and the steering linkages are OK.
-If the play exceeds the limit, adjust the rack guide (see page 17-17). If the play is still excessive after rack guide adjustment, inspect the steering linkage and steering gearbox (see page 17-5).
Rotational'play; 0—10 mm (0—0.39 In)
Power Assist Check
tires and wheels at the correct tire pressure.
1. Check the power steering fluid level (see page 17-28).
2. Start the engine, let it idle, and turn the steering wheel
from lock to lock several ...
See also:
Throttle Body Cleaning
Do n o t i n s e r t : your fingers into the installed throve
body when you turn the ignition switch to ON (II) or
while the ignition switch is in ON (II). If you do, you
will seriously injure your ...
Secondary Shaft Disassembly,
Inspection, and Reassembly
1. Inspect the thrust needle bearings a n d the needle bearings for g a l l i
n g and rough movement
2. Inspect the splines for excessive wear and damage.
3. Check the shaft bearing surface fo ...
Mainshaft Reassembly
Exploded View
*: The components of the double cone synchro assembly.
Special Tools Required
- Driver Handle, 40 mm I.D. 07746-0030100
-СћBearing Driver Attachment, 30 mm
07746-0030300
NOTE: ...