Checking the Battery

Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion. The battery condition is being monitored by the sensor on the negative terminal. ...

Remote Transmitter Care

Replacing the Button Battery If the indicator does not come on when the button is pressed, replace the battery. NOTICE An improperly disposed of battery can damage the environment. Always confi ...

See also:

Memorizing the Tire Pressure Sensor ID
Special Tools Required TPMS Trigger Tool ATEQ VT55* - Available through the Honda Tool and Equipment Program 888-424-6857 All four tire pressure sensor IDs must be memorized to the TPMS control u ...

Glass Replacement
1. Close the glass fully. 2. Slide the sunshade all the way back. 3. Pry out the lid (A), remove the screw (B), and release the hooks (C), then remove the bracket cover (D). Repeat on the op ...

Control Unit Input Test/Replacement
1. Remove the driver's dashboard lower cover (see page 20-166). 2. Remove the screws, then disconnect the 28P connector (A) from the HandsFreeLink control unit (B). 3. Inspect the connector an ...