Honda Accord: Playing the XM Radio (EX-L, Canadian EX, and all V6 models without 
navigation system) - Features - Honda Accord 2008-2012 Owner's ManualHonda Accord: Playing the XM Radio (EX-L, Canadian EX, and all V6 models without navigation system)

Eighth generation (2008–2012) / Honda Accord 2008-2012 Owner's Manual / Features / Playing the XM Radio (EX-L, Canadian EX, and all V6 models without navigation system)

Playing the XM Radio (EX-L, Canadian EX, and all V6 models without navigation
Playing the XM Radio (EX-L, Canadian EX, and all V6 models without navigation system)

Your vehicle is capable of receiving XM Radio anywhere in the United States and Canada, except Hawaii, Alaska, and Puerto Rico. XM is a registered trademark of Sirius XM Radio , Inc. and XMCANADA is a registered business name of Canadian Satellite Radio Inc.

XM Radio receives signals from two satellites to produce clear, highquality digital reception. It offers many channels in several categories.

Along with a large selection of different types of music, XM Radio allows you to view channel and category selections in the display.

Audio System Lighting
You can use the instrument panel brightness control knob to adjust the illumination of the audio system. The audio system illuminates when the parking lights are on, even if the radio is turne ...

Operating the XM Radio
To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or ON (II) position, and press the button. The last channel you listened to will show in the display. Adjust the volume ...

See also:

Front Brake Caliper Overhaul
Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health. - Avoid breathing dust particles. - Never use an air hose or brush to clean brake ...

DLC Circuit Troubleshooting
NOTE: If you suspect the HDS or the HDS DLC cable may be the source of the communication probrem, verify that they are working properly by connecting them to a known-good, like vehicle and system, ...

Transmission Reassembly
NOTE: Prior to reassembly, clean all the parts in solvent, dry them, and apply MTF to any contact surfaces. 1. Install the magnet (A) and the differential assembly (B). NOTE: Clean the magnet ...