Honda Accord: Component Location Index - Multiplex Integrated Control
System - Body Electrical - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Component Location Index

General Troubleshooting Information


    Multiplex Integrated Control System
    ...

    General Troubleshooting Information
    Troubleshooting CAN Circuit Related Problems NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-Can System Diagnosis Test Mode A (see page 22-134).. Using the ...

    See also:

    CKP Pulse Plate Replacement
    1. Remove the crankshaft from the engine block (see page 7-14). 2. Remove the CKP pulse plate (A) from the crankshaft. 3. Install the CKP pulse plate in the reverse order of removal. ...

    Clutch Pedal Assembly Replacement
    1. Disconnect the clutch pedal position switch connector (A) and the clutch interlock switch connector (B). 2. Pry out the lock pin (C), and pull the clevis pin (D) out of the clevis. 3. Remov ...

    Resetting the Moonroof Control Unit
    Resetting the moonroof is required when any of the following have occurred: • The moonroof was moved manually while the battery was dead or disconnected. • The moonroof motor was replace ...