Driving

This chapter discusses driving, refueling, and information on items such as accessories. ...

Driving Preparation

Check the following items before you start driving. • Exterior Checks • Make sure there are no obstructions on the windows, door mirrors, exterior lights, or other parts of the vehicle. &nbs ...

See also:

Dashboard/Steering Hanger Beam Removal/Installation
Special Tools Required KTC Trim Tool Set SOJATP2014* *Available through the Honda Tool and Equipment Program; call 888-424-6857 SRS components are located in this area. Review the SRS component l ...

Control Unit Input Test/Replacement
1. Remove the driver's dashboard lower cover (see page 20-166). 2. Remove the screws, then disconnect the 28P connector (A) from the HandsFreeLink control unit (B). 3. Inspect the connector an ...

Engine Oil Replacement
1. Warm up the engine. 2 Remove the drain bolt (A), and drain the engine oil. 3. Reinstall the drain bolt with a new washer (B). 4. Refill the engine with the recommended oil (see page 3-2). ...