Honda Accord: Engine Number
K24Z2: 2.4 L DOHC i-VTEC Sequential Multiport Fuel-injected, 177HP engine
K24Z3: 2.4 L DOHC i-VTEC Sequential Multiport Fuel-injected, 190HP engine
2000001 - K24Z2 produced in Marysville 2400001 - K24Z2 produced in Saitama 2450001 -K24Z3 produced in Saitama 2500001 - PZEV produced in Marysville 2700001 - PZEV produced in Saitama .2800001 - K24Z3 produced in Marysville
Secondary H02S Replacement
Special Tools Required 02 Sensor Wrench Snap-on S6176 or equivalent, commercially available 1. Disconnect the secondary H02S 4P connector (A), then remove the secondary H02S (B). 2. Install the ...
Control Unit Input Test
NOTE: Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A (see page 22-134), and make sure the lighting system works properly. Driver ...
1. Check the inboard boot (A) and the outboard boot (B) on the driveshaft (C) for cracks, damage, leaking grease, and loose boot bands (D). If any damage is found, replace the boot and the boot ban ...