Honda Accord: Courtesy Light Replacement
1 Carefully pry off the lens (A) with a small screwdriver.
Courtesy Light: 2 CP
2. Remove the bulb (B) from the socket.
3. Install the light in the reverse order of removal.
Ambient Light Replacement
With moonroof
NOTE: The ambient light is built into the moonroof
switch.
1. Remove the front individual map lights (see page
22-258).
2. Disconnect the moonroof switch 12P connector (A)
and ...
Glove Box Light Replacement
"08-09 models
1. Remove the glove box stops and damper (see page
20-174).
2. Turn the bulb socket (A) 45 В° counterclockwise to
remove it.
Glove Box Light: 2 CP
3. Remove the bulb (B) ...
See also:
Symptom Troubleshooting
SRS indicator does not come on
NOTE: 2-door: Before replacing t h e SRS u n i t , check the
SRS u n i t software v e r s i o n w i t h t h e HDS. I f t h e software
v e r s i o n is not t h e lates ...
Audio-HVAC Display Unit
Removal/Installation
Without Navigation
NOTE;
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard.
1. Remove the audio unit (see page 23-114) and the
center display visor (se ...
Heater Unit/Core Replacement
SRS components are located in this area. Review the
SRS component locations (see page 24-21) and the
precautions and procedures (see page 24-25) before
doing repairs or service.
1. Do the batter ...