Symptom Troubleshooting Information

General Check Before Troubleshooting Before troubleshooting the immobilizer system, check the following general items and solve any if applicable: • The battery is low; charge the battery ful ...

Symptom Troubleshooting

Immobilizer Indicator blinks NOTE; Before troubleshooting, check the Items listed In "General Check before Troubleshooting". 1. Turn the ignition switch to LOCK (0). 2. Connect the H ...

See also:

Fuel Tank Replacement
1. Drain the fuel tank (see page 11 -309). 2. Reinstall the fuel tank unit without connecting the fuel tank unit 4P connector and the quick-connect fitting (see page 11-321). 3. Remove the fue ...

MICU Input Test
NOTE: • Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A (see page 22-134). • Before testing, make sure the No. 5 (7. ...

Cf Hinder Bore Honing
Only a scored or scratched cylinder bore must be honed. 1. Measure the cylinder bores (see page 7-17). If the engine block is to be reused, hone the cylinders, and remeasure the bores. 2. Re ...