Honda Accord: If the Charging System IndicatorComes On
• Reasons for the indicator to come on
Comes on when the battery is not being charged.
• What to do when the indicator comes on
Turn off the heating and cooling system* /climate control system*, rear defogger, and other electrical systems, and immediately contact a dealer for repairs.
If you need to stop temporarily, do not turn off the engine. Restarting the engine may rapidly discharge the battery.
If the Low Oil Pressure IndicatorComes On
• Reasons for the indicator to come on
Comes on when the engine oil pressure is low.
• What to do as soon as the indicator comes on
1. Immediately park the vehicle in a safe place.
2. If ne ...
If the Malfunction Indicator LampComes On or Blinks
• Reasons for the indicator lamp to come on or blink
• Comes on when there is a problem with the engine emissions control
system, or the fuel fill cap is missing, or loose.
• Blinks when ...
See also:
Lower Arm Removal / Installation
Special Tools Required
- Ball Joint Thread Protector, 14 mm 07AAE-SJAA100
- Ball Joint Remover, 28 mm 07MAC-SL0A202
- Bushing Driver 070AF-TA0A100
- Bushing Receiver Set 070AF-TA0A220
Removal/Ins ...
Track Scan
When you press the SCAN side of
the SCAN/A. SEL bar or scroll down
and push the interface selector to
the left, the next track of the current
track plays for about 10 seconds.
You will see SC ...
CMP Pulse Plate A Replacement
1. Remove the cylinder head cover (see page 6-73).
2. Remove camshaft position (CMP) sensor A (see page
11-274).
3. Hold the camshaft with an open-end wrench, then
loosen the bolt.
4. Remov ...