Rearview Mirror Replacement

Without Automatic Dimming Mirror 1. Turn the rearview mirror base (A) 90 В°. 2. Slide the rearview mirror base (A) down toward the bottom of the windshield to detach it from the spring (B) in ...

Component Location Index

Front 4-door Rear ...

See also:

Park Lever Stop Inspection and Adjustment
1. Set the park lever in the P position. 2. Measure the distance (A) between the park pawl shaft (B) and the park lever roller pin (C). Standard: 57.7-58.7 mm (2.27-2.31 in) 3. If the measurem ...

Drive Belt Auto-tensioner Inspection
Special Tools Required Belt Tension Release Tool Snap-on YA9317 or equivalent, commercially available 1. Turn the ignition switch to ON (II), and make sure to turn the A/C switch OFF. Turn the ign ...

Symptom Troubleshooting Index
Find the symptom in the chart below, and do the related procedures in the order listed until you find the cause. ...