Honda Accord: DTC Troubleshooting Index
* 1 : Brake system indicator turns ON when two or more wheels fail.
*2: A/T
* 1 : Brake system indicator turns ON when two or more wheels fail.
*2: A/T
* 1 : Brake system indicator turns ON when two or more wheels fail.
*2: A/T
*1: Brake system indicator turns ON when two or more wheels fail.
*2: A/T
* 1 : Brake system indicator turns ON when two or more wheels fail.
*2: A/T
*1: Brake system indicator turns ON when two or more wheels fail.
*2: A/T
* 1 : Brake system indicator turns ON when two or more wheels fail.
*2: A/T
* 1 : Brake system indicator turns ON when two or more wheels fail.
*2: A/T
General Troubleshooting Information
Sf stem Indicator
This system has four indicators;
- ABS indicator (A)
- Brake system indicator (B)
- VSA indicator (C)
- VSA activation indicator (D)
When the system is OK, each indicator com ...
Symptom Troubleshooting Index
When the vehicle has one of these symptoms, check for VSA diagnostic trouble
codes (DTCs) with the HDS. If there are
no DTCs, do the diagnostic procedure for the symptom, in the sequence listed,
...
See also:
Control Unit Input
Test/Replacement
1. Remove the driver's dashboard lower cover (see page 20-166).
2. Remove the screws, then disconnect the 28P connector (A) from the
HandsFreeLink control unit (B).
3. Inspect the connector an ...
Safety Labels
These labels are in the locations
shown. They warn you of potential
hazards that could cause serious
injury or death. Read these labels
carefully.
If a label comes off or becomes hard
to ...
Information Display
When there is an incoming call, or
HFL is in use, ‘‘HANDSFREELINK’’
will appear on the display.
‘‘ ’’ indicator will be
displayed on
the audio display when a phone is
lin ...