Honda Accord: Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass.
Changing the Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the
passenger side.
2. Press and hold the tab, then slide the blade
from the wiper arm.
NOTICE
Avoid dropping the wiper arm; it may damage the ...
See also:
Intermediate Shaft Installation
1. Clean the areas where the Intermediate shaft contacts
the differential thoroughly with solvent, and dry then
with compressed air.
NOTE: Do not wash the rubber parts with solvent.
2. Install ...
Transmission End Crankshaft Oil
Seal Installation - In Car.
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Oil Seal Driver Attachment, 96 mm 07ZAD-PNAA100
1 Remove the transmission:
- Manual transmission (see page 13-7)
- Automatic transmis ...
Throttle Body Cleaning
Do n o t i n s e r t : your fingers into the installed throve
body when you turn the ignition switch to ON (II) or
while the ignition switch is in ON (II). If you do, you
will seriously injure your ...