Openers

...

Hood Opener Cable Replacement

NOTE: - Put on gloves to protect your hands. - Take care not to scratch the body or the related parts. - Take care not to kink the hood opener cable. 1. Remove these items: - Front grille c ...

See also:

Status Log
If you suspect there is a immobilizer system problem, check the status log. 1. Connect the HDS to the data link connector. 2. Turn the ignition switch to ON (II). 3. On the HDS screen, at MAI ...

Evaporator Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs (see page 2 1 - 9). 1. Remove the evaporator temperature sensor (see page 21-67). 2. Dip the sensor in ice water, and measure the resistan ...

HVAC Control Power and Ground Circuit Troubleshooting
1. Check the No. 16 (7.5 A) fuse in the driver's under-dash fuse/ relay box. Is the fuse OK? YES-Go to step 2. NO-Replace the fuse, and recheck. If the fuse blows again, check for a short in ...