Honda Accord: Coat Hook
To use a coat hook, pull it down.
Close it with a firm push.
Make sure the coat hook is closed when you are not using it. This hook is not designed for large or heavy items.
Fog Light Bulbs*
When replacing, use the following bulbs. 1. Loosen the screw using a Phillips-head screwdriver. - Be careful not to rotate the screwdriver more than one or two times to the left. ...
Door Key Cylinder Switch Test
1. Remove the driver's door panel (see page 20-17). 2. Disconnect the 10P connector (A) from the door lock actuator (key cylinder switch) (B). 3. Check for continuity between the terminals. ...
Dynamic Damper Replacement
1. Remove the Inboard joint (see page 16-7). 2. Remove the dynamic damper band (see step 1 on page 16-7). 3. Remove the dynamic damper (A). Left driveshaft Right driveshaft 4. Install a ...