Honda Accord: Wheel and Tire Specifications - Tires - Maintenance - Honda Accord 2008-2012 Owner's ManualHonda Accord: Wheel and Tire Specifications

Wheels

4-cylinder models:

17 x 7 1/2J

V6 models:

18 x 8J

Tires

4-cylinder models:

P225/50R17 93V

V6 models:

P235/45R18 94V

    Replacing Tires andWheels
    Replace your tires with radial tires of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Mixing radial and bias-ply tires on ...

    Winter Driving
    Tires marked ‘‘M + S’’ or ‘‘All Season’’ on the sidewall have an allweather tread design suitable for most winter driving conditions. For the best performance in snowy or icy ...

    See also:

    Inspection
    Out of Vehicle For front seat belt retractors with seat belt tensioners, review the SRS component locations, 2-door (see page 24-23), 4-door (see page 24-21) and the precautions and procedures (se ...

    General Troubleshooting Information
    How to Check for DTCs with the Honda Diagnostic S f stem (HDS) When the powertrain control module (PCM) senses an abnormality in the input or output system, the D indicator (A) in the gauge contro ...

    Intermediate Shaft Installation
    1. Clean the areas where the Intermediate shaft contacts the differential thoroughly with solvent, and dry then with compressed air. NOTE: Do not wash the rubber parts with solvent. 2. Install ...