Maintenance Under the Hood

...

Opening the Hood

1. Park the vehicle on a level surface, and set the parking brake. 2. Pull the hood release handle under the lower left corner of the dashboard.  - The hood will pop up slightly. 3. ...

See also:

Rear License Plate Light Bulbs
When replacing, use the following bulbs. 1. Remove the license plate light assembly by pushing the left edge of the lens toward the right and pulling the assembly out. 2. Remove the lens b ...

Rocker Arm Assembly Removal
1 Remove the cam chain (see page 6-62). 2. Loosen the rocker arm adjusting screws (A). 3. Remove the camshaft holder bolts. To prevent damaging the camshafts, loosen the bolts, in sequence, tw ...

Electrical Compass Zone Selection and Calibration
NOTE: • You should do this procedure any time the electrical compass unit is replaced. • You should do this procedure in an open area away from buildings, power lines, and other vehicl ...