Honda Accord: Fuel Tank Draining - Fuel Supply System - Fuel and Emissions - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Fuel Tank Draining

1. Remove the fuel tank unit (see page 11 -320).

2. Using a hand pump, a hose, and a container suitable for fuel, draw the fuel from the fuel tank.

3. Reinstall the fuel tank unit (see page 11-321).

    Fuel Pressure Test
    Special Tools Required - Fuel Pressure Gauge 07406-004000B - Fuel Pressure Gauge Attachment Set 07AAJ-S6MA150 1. Relieve the fuel pressure (see page 11-306). 2. Attach the fuel pressure gauge se ...

    Fuel Line Inspection
    Check the fuel system lines and hoses for damage, leaks, and deteriorationi,. Replace any damaged parts. Check all clamps, and make sure they are properly positioned and tightened. All models ex ...

    See also:

    EVAP Canister Purge Valve Replacement
    1. Disconnect the E V A P canister purge valve 2P connector ( A ) . 2. Disconnect the hoses ( B ) , then remove the I V A P canister purge valve ( C ) . 3. Install the parts in the reverse ord ...

    Rear Brake Disc Replacement
    NOTE: Keep any grease off the brake disc and the brake pads. 1. Raise and support the vehicle (see page 1-13). 2. Remove the rear wheel. 3. Release the parking brake lever fully. 4. Loose ...

    Fuel Line/Quick-Connect Fitting Precautions
    The fuel line/quick-connect fittings (A, B, C, D, E, and F) connect the fuel rail (G) to the fuel feed hose (H), the fuel feed hose to the fuel line (I), the fuel line (J) to the fuel tank unit (K) ...