Coat Hook

To use a coat hook, pull it down. Close it with a firm push. Make sure the coat hook is closed when you are not using it. This hook is not designed for large or heavy items. ...

Interior Lights

...

See also:

Tie-rod End Ball Joint Boot Replacement
Special Tools Required Bearing Driver Attachment, 36 07965-SA50500 1 Disconnect the tie-rod end ball joint from the knuckle (see step 26 on page 17-41). 2. Remove the tie-rod end from the rack e ...

Trunk Lid Adjustment
1. Remove the rear shelf (see page 20-128). 2. Pry up the notches (A) to release the rear hooks (B), and pull up the cap (C) to release the side hooks (D), then remove the cap. 3. Slightly lo ...

Mode Control Motor Test
NOTE: Before testing the motor, check for HVAC DTCs (see page 21-101). 1. Disconnect the 7P connector from the mode control motor. Incorrectly applying power and ground to the mode control mo ...