Seat Belt Inspection

Regularly check the condition of your seat belts as follows: • Pull each belt out fully, and look for frays, cuts, burns, and wear. • Check that the latches work smoothly and the belts retract ...

Airbag System Components

The front, front side, and side curtain airbags are deployed according to the direction and severity of impact. Both side curtain airbags are deployed in a rollover. The airbag system inclu ...

See also:

A/C Signal Circuit Troubleshooting
1. Start the engine, and let it idle. 2. Turn the blower switch on. 3. Turn the A/C switch on. 4. Check the A/C CLUTCH in the DATA LIST with the HDS. Does it indicate ON? YES-Go to step ...

Door Lock Actuator Test
Driver's Door and Left Rear Door (4-door) 1 Remove the door panel. • Front (see page 20-17) • Rear (see page 20-38) 2. Disconnect the 10P connector (A) from the actuator (B). NOTE: T ...

Secondary Shaft Disassembly, Inspection, and Reassembly
1. Inspect the thrust needle bearings a n d the needle bearings for g a l l i n g and rough movement 2. Inspect the splines for excessive wear and damage. 3. Check the shaft bearing surface fo ...