Honda Accord: Intake Manifold and Exhaust System
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Engine Mechanical / Intake Manifold and Exhaust System
- Component Location Index
- Intake Manifold Removal and Installation
- Exhaust Pipe and Muffler Replacement
Oil Pump Chain Replacement
NOTE: Keep the oil pump chain away from magnetic
fields.
Removal
1. Remove the drive belt (see page 4-30).
2. Remove the oil pan (see page 7-11).
3. Support the engine with a jack and a wood ...
See also:
Knuckle/Hub Bearing Unit Replacement
Exploded View
Special Tools Required
- Ball Joint Thread Protector, 14 mm
07AAE-SJAA100
- Ball Joint Remover, 32 mm 07MAC-SL0A102
Hub Bearing Unit Replacement
1. Raise and support the vehicle ...
Countershaft Inspection
1. Inspect the gear and bearing contact areas for wear
and damage, then measure the countershaft at points
A, B, and C. If any part of the countershaft is less than
the service limit, replace it.
...
Troubleshooting
Special Tools Required
Vacuum Pump/Gauge, 0-”30 inHg Snap-on YA4000A or
equivalent commercially available
NOTE:
- Check the vacuum hoses and the lines for damage and
proper connections befor ...