Honda Accord: Fog Lights
When the low beam headlights are on, turn the fog light switch on to use the fog lights.
When the fog lights are on, the indicator in the instrument panel will be on.
They go off when the headlights turn off, or when the daytime running lights are on.
Light Switches
• Manual Operation
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch*1.
• High beams
Push the lever forward until you hear a click.
...
Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the
following
conditions have been met:
The parking/daytime running lights come on when the following conditions have
been ...
See also:
CKP Pulse Plate Replacement
1. Remove the crankshaft from the engine block (see
page 7-14).
2. Remove the CKP pulse plate (A) from the crankshaft.
3. Install the CKP pulse plate in the reverse order of
removal. ...
System Description
VSA Modulator-Control Unit Inputs and Outputs for 36P Connector (Connector
Disconnected
Wire side of female terminals.
System Outline
This system i s composed of the VSA modulator-control u ...
Symptom Troubleshooting Index
When the vehicle has one of these symptoms, check for VSA diagnostic trouble
codes (DTCs) with the HDS. If there are
no DTCs, do the diagnostic procedure for the symptom, in the sequence listed,
...