Tire Pressure Monitoring System (TPMS) -Required Federal Explanation

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire infl ...

Brake System

• Parking Brake Use the parking brake to keep the vehicle stationary when parking. To apply: Pull the lever fully up without pressing the release button. To release: 1. Pull the lever sli ...

See also:

Brake Hose and Line Inspection
1. Inspect t h e brake hoses for d a m a g e , deterioration, leaks, interference, and twisting. 2. Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines. 3. ...

Wiper Motor Replacement
Removal 1. Open the hood. Remove the caps (A) and nuts (B). NOTE: The illustration shows 4-door. 2. Close the hood, then spread protective cloths (A) on the hood to avoid scratching the hood e ...

Park Lever Stop Inspection and Adjustment
1. Set the park lever in the P position. 2. Measure the distance (A) between the park pawl shaft (B) and the park lever roller pin (C). Standard: 57.7-58.7 mm (2.27-2.31 in) 3. If the measurem ...