Towing Your Vehicle

Your vehicle is not designed to be towed behind a motor home. If your vehicle needs to be towed in an emergency, refer to the emergency towing information. ...

Starting the Engine

1. Make sure the parking brake is applied. 2. Check that the shift lever is in , then depress the brake pedal.  - Although it is possible to start the vehicle in , it is safer to st ...

See also:

Backlash Inspection
1. Install both axles into the A/T differential, then place the axles on V-blocks. 2. Check the backlash of the pinion gears (A) using a dial indicator (B). Standard: 0.05-0.15 mm (0.002-0.006 i ...

Outside Air Temperature Sensor Replacement
1. Lift the tab (A) to release the lock, then remove the outside air temperature sensor (B) from the front bumper beam. Disconnect the 2P connector (C) from the outside air temperature sensor. 2 ...

Countershaft Reverse Selector Hub and 3rd Gear Removal
1. Install a commercially available bearing separator on 4th gear (A). Set the countershaft (B) on a press with a spacer (C) between the press and the countershaft, and remove the reverse selector ...