Honda Accord: XM Antenna Replacement
1. Remove the headliner (see page 20-140).
2. Remove the nut (A) from the XM antenna (B).
3. Disconnect the connector (C) and remove the XM antenna.
4. Install the XM antenna in the reverse order of removal.
AM/FM Antenna Repair
NOTE: To make an effective repair, the broken section
must be no longer than one Inch.
1. Lightly rub the area around the broken section (A)
with fine steel wool, then clean it with isopropyl
al ...
Auxiliary Jack Assembly
Replacement
1. Remove the center console (see page 20-158).
2. Disconnect the 5P connector (A), and carefully pull out
the auxiliary jack assembly (B) from the center
console box.
3. Install the auxiliary ...
See also:
A/C Compressor Clutch Overhaul
Special Tools Required
• A/C Clutch Holder Robinair 10290 or Kent-Moore
J37872, commercially available
• A/C Clutch Holder Honda Tool and Equipment
ACT499A, commercially available
1. Re ...
Steering Gearbox Removal
Special Tools Required
-Engine Hanger Adapter VSB02C000015*
•Engine Support Hanger, A and Reds
AAR-T1256*
-Ball Joint Remover, 28 mm 07MAC-SL0A202
-Ball Joint Thread Protector, 12 mm
07AA ...
How the Side Airbag Off Indicator Works
This indicator alerts you that the
passenger’s side airbag has been
automatically shut off. It does not
mean there is a problem with your
side airbags.
When you turn the ignition switch t ...