Honda Accord: Vehicle Identification Number - Chassis and Paint Codes - '08 4-door Model - General Information - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Vehicle Identification Number

a. Manufacturer, Make, and Type of Vehicle


a. Manufacturer, Make, and Type of Vehicle

1HG: Honda of America Mfg., Inc.

Honda passenger vehicle

JHM: Honda Motor Co., Ltd.

Honda passenger vehicle

b. Line, Body, and Engine Type

CP2: Accord/K24Z2, K24Z3

c. Body Type and Transmission Type

5: 4-door Sedan/5-speed Manual

6: 4-door Sedan/5-speed Automatic

d. Vehicle Grade (Series)

USA models

3: LX, LX PZEV

4: LX-P, LX-P PZEV

7: EX, EX PZEV

8: EX-L, EX-L PZEV

Canada models

3: LX

4: LX-P

7: EX

8: EX-L

e. Check Digit

f. Model Year

8: '08

g. Factory Code

A: Marysville, Ohio Factory in U S.A.

C: Saitama Factory in Japan

h. Serial Number

0 0 0 0 0 1 U S A models

800001 -”: Canada models


Engine Number


    Chassis and Paint Codes - '08 4-door Model
    ...

    Engine Number
    a. Engine Type K24Z2: 2.4 L DOHC i-VTEC Sequential Multiport Fuel-injected, 177HP engine K24Z3: 2.4 L DOHC i-VTEC Sequential Multiport Fuel-injected, 190HP engine b. Serial Number 1000001 -вР...

    See also:

    Door Striker Adjustment
    Make sure the door latches securely without slamming it. If necessary, adjust the striker (A): The striker nuts are fixed, but the striker can be adjusted slightly up or down, and in or out. 1. ...

    ECT Sensor 2 Replacement
    1. Remove the front splash shield, (see page 20-291) 2. Drain the engine coolant (see page 10-6). 3. Disconnect the ECT sensor 2 connector (A), then remove ECT sensor 2 (B). 4. Install ECT sen ...

    Front Brake Disc Inspection
    Runout 1. Raise and support the vehicle (see page 1-13). 2. Remove the front wheels. 3. Remove the brake pads: NISSIN type (see page 19-14), AKEBONO type (see page 1947) 4. Inspect the bra ...