Honda Accord: Vanity Mirror Light Test/Replacement
1 . Remove the sunvisor (see page 20-135).
2. Disconnect the 2P connector (A) from the sunvisor (B).
Vanity Mirror Light: 1.1 W x 2
3. Check for continuity between terminals No. 1 and No.
2.
• With the vanity mirror cover (C) opened, there should be continuity.
• With the vanity mirror cover closed, there should be no continuity.
4. If the continuity is not as specified, check the bulbs (D). If the bulbs are OK the vanity mirror light is faulty; replace the sunvisor (see page 20-135).
Glove Box Light Replacement
"08-09 models
1. Remove the glove box stops and damper (see page
20-174).
2. Turn the bulb socket (A) 45 В° counterclockwise to
remove it.
Glove Box Light: 2 CP
3. Remove the bulb (B) ...
Trunk Lid Latch Switch Test
1. Open the trunk lid.
2. Disconnect the 3P connector (A) from the trunk lid
latch assembly (B).
3. Check for continuity between terminals No. 1 and No.
2.
• There should be continui ...
See also:
HFL Switch Test
1. Remove the driver's airbag (see page 24-211)
2. Remove the steering wheel (see page 17-6).
3. Measure the resistance between terminals No. 3 and
No. 4 in each switch position according to the ...
When Driving
...
Steering Wheel Removal
SRS components are located in this area. Review the
SRS component locations: 4-door {see page 24-21),
2-door (see page 24-23) and the precautions and
procedures (see page 24-25) before doing repair ...