Honda Accord: Turn Signals - Operating the Switches Around theSteering Wheel - Controls - Honda Accord 2013-2022 Owner's ManualHonda Accord: Turn Signals

The turn signals can be used when the ignition

The turn signals can be used when the ignition switch is in ON • One-touch turn signal.

• One-touch turn signal

When you lightly push up or down and release the turn signal lever, the exterior turn signals and turn signal indicator blink three times.

This feature can be used when signaling for a lane change.

    Ignition Switch and Power ModeComparison
    ...

    Light Switches
    • Manual Operation Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch*1. • High beams Push the lever forward until you hear a click. ...

    See also:

    Clutch Wave-plate Phase Difference Inspection
    1. Place the clutch wave-plate (A) on a surface plate, and set a dial indicator (B) on the wave-plate. 2. Find the bottom (C) of a phase difference of the wave-plate, zero the dial indicator an ...

    How to Use This Manual
    This manual is divided into multiple sections.The first page of each section is marked with a black tab that lines up with its corresponding thumb index tab on this page and the back cover. You c ...

    Air Mix Control Motor Test
    NOTE: Before testing the motor, check for HVAC DTCs (see page 21-9). 1. Disconnect the 7P connector from the air mix control motor. Incorrectly applying power and ground to the air mix contro ...