Honda Accord: Trunk Lid Cushion Replacement
1. Remove the trunk lid cushion (A) by pulling it out to detach the clips.
2. Replace the trunk lid cushion with a new one.
3. Install the trunk lid cushion by pushing on the clip areas until the clips snap into place.
Trunk Lid Weatherstrip Replacement
NOTE: 4-door Is shown; 2-door Is similar.
1. Remove the trunk lid weatherstrip (A) by pulling it off.
2. Locate the painted alignment mark (B or C) on the
trunk lid weatherstrip. Align the pain ...
Trunk Lid Dynamic Damper
Replacement
2-door
NOTE: Take care not to scratch the trunk lid.
1. Remove the cover (A) by releasing the hooks (B).
Remove the bolts, and detach the clips, then remove
the trunk lid dynamic damper bracke ...
See also:
TPMS (Tire Pressure Monitoring System)
Instead of directly measuring the pressure in each tire, the TPMS on this
vehicle
monitors and compares the rolling radius and rotational characteristics of each
wheel and tire while you are dri ...
Steering Gearbox Overhaul
Exploded View
Special Tools Required
-Cylinder End Seal Remover Attachment
07TAF-SZ50100
-Valve Seal Ring Sizing Tool 07NAG-SR3090A
-Sleeve Seal Guide, 35.9 x 37
07YAG-S2X0100
-Sizing Tool, ...
CMP Sensor A Replacement
1. Disconnect the CMP sensor A 3P connector (B).
2. Remove CMP sensor A from the intake camshaft side
of the cylinder head.
3. Install the parts in the reverse order of removal with a
new O-ri ...