Honda Accord: Tripped Sensor History
The security s y s t em stores information o n t h e last tripped sensor if t h e security s y s t em has been actuated.
The information can be retrieved u s i n g t h e HDS.
To retrieve t h e last tripped sensor data, d o t h i s ; 1. Select HISTORY DATA f r om t h e security system MODE menu.
2. Scroll through the data list.
• Sensors t h a t w e r e actuated w i l l indicate ON.
• Sensors t h a t w e r e not actuated w i l l indicate NONE.
3. Inspect t h e ON circuit f o r t h e s e problems: • Misadjusted o r damaged switch.
• Loose o r corroded connections.
• Intermittent short t o ground.
NOTE: If PANIC Frame Reception is indicated ON, inform the customer that it could have been set by something pressing the panic button of one of the registered remotes (in a pocket or purse, under a stack of papers, etc.).
Transmitter Test
NOTE:
• If the doors unlock or lock with the
transmitter, but the
LED on the transmitter does not come on, the LED is
faulty; replace the transmitter.
• If any door is open, you cann ...
Horns
...
See also:
Engine Oil Life Display
To see the current engine oil life,
turn the ignition switch to the ON
(II) position, then press and release
the select/reset knob repeatedly
until the engine oil life indicator
appears.
...
Steering Wheel Removal
SRS components are located in this area. Review the
SRS component locations: 4-door {see page 24-21),
2-door (see page 24-23) and the precautions and
procedures (see page 24-25) before doing repair ...
Servo Body Disassembly, Inspection,
and Reassembly
1. Clean all parts thoroughly in solvent, and dry them with compressed air.
Blow out all passages.
2. Inspect the valve body for scoring and damage.
3. Check shift valve D for free movement. I ...