Honda Accord: Transaxle
Priweline/Ajcle
- Special Tools
- Component Location Index
- Driveshaft Inspection
- Driveshaft Removal
- Driveshaft Disassembly
- Dynamic Damper Replacement
- Driveshaft Reassembly
- Driveshaft Installation
- Intermediate Shaft Removal
- Intermediate Shaft Disassembly
- Intermediate Shaft Reassembly
- Intermediate Shaft Installation
Carrier Bearing Preload Inspection
Special Tools Required
•Driver Handle, 15 x 135L 07749-0010000
•Attachment, 72 x 75 mm 07746-0010600
-Preload Inspection Tool 07HAJ-PK40201
NOTE;
-If the transmission housing, the torqu ...
Special Tools
...
See also:
Active Noise Cancellation
Microphone
Removal/Installation
Front
1. Remove the roof console (see page 20-140), and
disconnect the connector (A) from the front active
noise cancellation microphone (B).
2. Remove the screws and the front active noise
can ...
Fuse/Relay Boxes
Connector to Fuse/Relay Box Index
Under-hood Fuse/Relay Box
*: '08-09 models
Driver's Under-dash Fuse/Relay B O M
Passenger's Under-dash Fuse/Relay Box
*1: LX, LX PZEV, LX-P, LX-P PZE ...
Drive Plate Removal and Installation
1. Remove the transmission assembly (see page
14-194).
2. Remove the drive plate (A) and the washer (B) from
the engine.
3. Install the drive plate and the washer on the engine,
and tighten t ...