Honda Accord: To Stop Playing a Disc
Press the eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload the disc after 10 seconds and begin playing.
You can also eject the disc when the ignition switch is off.
To play the radio when a disc is playing, press the AM, FMor XM (if equipped) button. Press the CD (CD/AUX on models with XM Radio) button again to switch back to the disc changer.
You can also press the MODE button on the steering wheel to change modes.
If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive.When you turn the system back on, the disc will begin playing where it left off.
Removing Discs from the In-dash Disc Changer
To remove the disc currently in play, press the eject button. When a disc is removed from a slot, the system automatically begins the load sequence so you can load another disc in that position. If you do not remove the disc from the changer within 10 seconds, the disc will reload into the slot. Then the system returns to the previous mode (AM, FM, or XM Radio).
To remove a different disc from the changer, first select it with the appropriate preset button. When that disc begins playing, press the eject button. Continue pressing the eject button to remove all the discs from the changer.
You can also eject discs when the ignition switch is off. The disc that was last selected is ejected first.
Grab Handle Removal/Installation
Special Tools Required KTC Trim Tool Set SOJATP2014* *Available through the Honda Tool and Equipment Program; call 888-424-6857 NOTE: - Use the appropriate tool from the KTC trim tool set to a ...
Ceiling Light Test/Replacement
1. Turn the celling light switch OFF. 2. Carefully pry the lens (A) off with a small screwdriver. 2. Carefully pry the lens (A) off with a small screwdriver. Celling Light 8 W 3. Remove the ...