Honda Accord: Tire Rotation
Rotating tires according to the maintenance messages on the information display*/ multi-information display* helps to distribute wear more evenly and increase tire life.
Tires with directional tread patterns should only be rotated front to back (not from one side to the other).
Directional tires should be mounted with the rotation indication mark facing forward, as shown below.
Whenever tires are rotated, you must calibrate the TPMS.
• Tires without rotation marks
Rotate the tires as shown here.
• Tires with rotation marks
Rotate the tires as shown here.
Tire and Wheel Replacement
Replace your tires with radials of the same size, load range, speed rating,
and
maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires
of a
different size or constr ...
Winter Tires
If driving on snowy or frozen roads, mount all season marked M+S
tires, snow tires, or tire
chains; reduce speed; and maintain sufficient distance between vehicles when
driving.
Be particularly ...
See also:
Advice for Pregnant Women
If you are pregnant, the best way to
protect yourself and your unborn
child when driving or riding in a
vehicle is to always wear a seat belt,
and keep the lap part of the belt as
low as p ...
General Troubleshooting
Information
General Operation
Refer to the navigation system manual for the
navigation system operating procedures.
Anti-theft Feature
The navigation system and audio unit have a coded theft
protection circu ...
Cylinder Head
Component Location Index (cont'd)
Engine Compression Inspection
NOTE: After this inspection, you must reset the engine
control module (ECM)/powertrain control module
(PCM), otherwise the ECM ...