Honda Accord: Tire and Loading Information Label
The label attached to the driver’s doorjamb provides necessary tire and loading information.
The tire and loading information label attached to the driver’s doorjamb contains:
1 The number of people your vehicle can carry.
2 The total weight your vehicle can carry. Do not
exceed this weight.
3 The original tire sizes for front, rear, and spare.
4 The proper cold tire pressure for front, rear, and
spare.
Checking Tires
To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated. • Inflation guidelines Properly inflated tires pro ...Tire Labeling
The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. • Tire Sizes Whenever tires are replaced, they should be replaced with tires ...See also:
Emergency Engine Stop
If you cannot stop the engine by pressing the ENGINE START/STOP
button, do
either of the following operations:
• Press and hold the ENGINE START/STOP button for about two seconds.
• Firmly ...
Front Seat Recline Motor Replacement
Driver's Seat (10-way Power Seat)
SRS components are located in this area. Review the
SRS component locations, 2-door (see page 24-23),
4-door (see page 24-21) and the precautions and
procedures ( ...
MICU input Test
NOTE: Before testing, troubleshoot the multiplex integrated control unit
first, using B-CAN System Diagnosis Test Mode
A (see page 22-134).
Driver's MICU
1. Turn the ignition switch to LOCK (0), ...