Honda Accord: System Description
HandsFreeLink Control Unit Inputs and Outputs
HandsFreeLink Control Unit 28P Connector
*l:The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray may not match the color of the wire shown on the circuit diagram.
*2:With navigation
*3:Without navigation
HFL System Troubleshooting
NOTE:
• Before doing this troubleshooting, refer to General Troubleshooting
Information (see page 23-254) to make sure the
phone is compatible and configured correctly.
• You must be ...
See also:
Manual Transmission and M/T Differential (cont'd)
...
Speaker Test/Replacement
Front Door Speaker
1. Remove the door panel.
• 4-door (see page 20-17)
• 2-door (see page 20-12)
2. Remove t h e bolt (A). Then lift the speaker straight up
to release t h e lower cli ...
Idler Gear/Idler Gear Shaft
Replacement
Special Tools Required
-Driver Handle, 15 x 135L 07749-0010000
-Attachment, 32 x 35 mm 07746-0010100
1. Remove the snap ring from the idler gear/idler shaft
assembly. Do not distort the snap ring. ...