Honda Accord: Synchronized Mode
You can set the temperature synchronously for the driver side and the passenger side in synchronized mode.
1. Press the SYNC button.
- The system will switch to the synchronized mode.
2. Adjust the temperature using driver’s side temperature control buttons.
Press the SYNC button to return to dual mode.
When you press the 
button,
the system changes
to synchronized mode.
When the system is in dual mode, the driver side temperature and the passenger side temperature can be set separately.
The system adjusts each temperature based on the information of the sunlight sensor and the sun position updated by the navigation system’s GPS.
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you
select.
The system also selects the proper mix of heated or cooled air that will as
quickly as
possible, raise or l ...
Automatic Climate Control Sensors
The automatic climate control system is
equipped with a sunlight sensor and an
interior temperature sensor. Do not cover or
spill any liquid on them.
...
See also:
Trunk
You can open the trunk in two ways:
Pull up on the trunk release lever
to the left of the driver’s seat.
Press and hold the trunk release
button on the remote transmitter.
To close the trun ...
Ignition Key Light Test
1. Remove the steering column upper and lower covers
(see page 20-181).
2. Disconnect the 6P connector (A).
3. The LED should come on when power is connected to
terminal No. 6 and ground is co ...
Carrying Cargo
Your vehicle has several convenient
storage areas:
Glove box
Door and seat-back pockets
Roof-rack (if installed)
Center pockets
Console compartment
Trunk, including the rear seat
when fold ...