Component Location Index

...

System Description

Overview The electrical compass shows the azimuth information in 8-directions (N, NE, E, SE, S, SW, W, NW) to the audio-HVAC display unit via the audio unit. Starting Operation When the igniti ...

See also:

System Check
1. Connect the HDS to the data link connector. 2. Turn the ignition switch to ON (II). 3. Monitor the SYSTEM CHECK in the IMMOBILIZER INFO with the HDS. 4. If the HDS displays NORMAL N-1,the ...

Pump Replacement
1. Place a suitable container under the vehicle to catch any spilled fluid. 2. Drain the power steering fluid from the reservoir (see page 17-28). 3. Remove the drive belt (A) from the pump pu ...

Rack Guide Adjustment
Special Tools Required Locknut Wrench, 40 mm 07MAA-SL00100 or Locknut Wrench, 41 mm 07916-SA50001 1. Set the front wheels in the straight ahead position. 2. Loosen the rack guide screw locknut ( ...