Symptom Troubleshooting Information

General Check Before Troubleshooting Before troubleshooting the immobilizer system, check the following general items and solve any if applicable: • The battery is low; charge the battery ful ...

Symptom Troubleshooting

Immobilizer Indicator blinks NOTE; Before troubleshooting, check the Items listed In "General Check before Troubleshooting". 1. Turn the ignition switch to LOCK (0). 2. Connect the H ...

See also:

Tensioner Pulley Replacement
1. Remove the auto-tensioner (see page 4-31). 2. Clamp the auto-tensioner (A) by using two 8 mm bolts (B) and a vise (C) as shown. Do not clamp the auto-tensioner itself, then remove the tensione ...

Rear Bumper Removal/Installation
NOTE: - Have an assistant help you when removing and installing the rear bumper. - Take care not to scratch the rear bumper or the body. - Put on gloves to protect your hands. - When prying ...

Clutch Hydraulic System Bleeding
NOTE: - Do not reuse the drained fluid. Always use Honda DOT 3 Brake Fluid from an unopened container. Using a non-Honda brake fluid can cause corrosion and shorten the life of the system. - Ma ...